Thursday, December 18, 2014

Little Black Knit Dress



This is a copy of an H&M knit dress that I've been wearing for the past few years. I finished it just in time for Thanksgiving dinner!

Although a simple dress to sew, the pattern drafting and fitting wasn't so easy! 

Using my seam ripper, I tore the dress apart and then made my first pass at sewing the bodice, cutting straight into my fashion fabric--a Derek Lam ponte knit from Mood.  Unfortunately, two things led to my first attempt becoming a de-facto muslin.  1) My iron spewed gunk onto the bodice and I couldn't get it out.  Now, I have a new iron! 2) I discovered that the bodice was actually too large on the right side of my body.  Sharon, my new sewing instructor, explained to me that the existing pattern (the H&M dress) had clearly stretched from use on the right side. This makes sense, since I am right handed and favor my right side for activity.  Thus, the right side was no longer the mirror image of the left side.  The stretching of the fabric in the H&M dress was also evident in the waist. On my muslin, the waistband was about 2 inches wider than the bodice.   The larger waistband size turned out to be more comfortable, so we added 2 inches to the sides of the bodice pieces.  

With Sharon's help, I converted the changes in the muslin to wax paper and then to butcher paper.  Now, I was ready to try again!  Muslin #2 didn't fit either--the neckline wouldn't lay flat and I needed to take close to 4 inches out of each shoulder seam. 

The finished dress still needs some tweaking, but it is wearable!  For the next iteration, I plan to take out about 1/2 an inch on the sides of the bodice so that it fits a bit more snug around my torso and deal with the gaping at the neckline. 

Don't you love the trim?  I picked up this crochet and velvet trim from M&J! 



Tuesday, October 21, 2014

Pants Party!

I MADE A PAIR OF SEMI WEARABLE PANTS!

In May, Lauren from Lladybird announced that she would be in NYC to teach a pant-making workshop. I immediately signed up!  In mid-August, I ventured into Brooklyn to Jennifer's Workroom Social for the weekend...and emerged Sunday evening with a decent fitting wearable muslin! 


Using Palmer/Pletsch's 6901, we got to work fitting the pre-assembled muslins.   I only had to make a few adjustments to the pattern, most notably removing some of the length out of the front. 

I used stretch sateen from Paron and made the pockets out of a beautiful cotton print bought in Venice in 2008.

It was both a humbling and invigorating weekend! I have much to learn to become a more competent sewer.   Either way...it was a great experience and I was so inspired by all the kind, interesting and competent women with whom I shared the weekend. Plus, I met the lovely Lauren--- my first "sewing celebrity." 
Lauren (wearing a Zinnia skirt and papercut wrap top) demo-ing the zipper insertion


The pattern was a bit too high-waisted for my taste and I don't anticipate that these pants will make it out of the apartment. I have my eyes on the lower-waisted Thurlow trouser pattern for my next pair.  Stay Tuned!  

Saturday, September 13, 2014

Conquering Upholstery

It's finally finished!

This was a true labor of love.  I stabbed my hands with a thousand pins, bent many upholstery needles and pins, ripped out and restitched too many seams to count, bruised my hands from the staple gun, and jammed my sewing machine at least a dozen times. All in, this project probably took 40 hours.  And, I am so proud of the results!

In 2011, Michael bought a $10 Craigslist chair for his grad school apartment. I hated everything about his apartment, and wanted no reminders of those two years of long distance--chair included.  In spite of my protests, he brought the chair with him when we moved to NYC together last summer.  

Since we were not willing to shell out for a professional re-upholstery job or invest in a new chair, the only option was to DIY.  I quickly convinced Michael that I could knock the project out in "one long weekend" with his engineering help.  Little did he know, I had no idea what I was talking about...

We started fabric shopping at Zarin's in Chinatown and made multiple trips to the garment district, returning home with swatches each time.  But, we weren't able to find anything we liked.  Finally,  at Mood last September, we found the perfect suite of fabrics to re-do the seats of our dining room chairs (finished!), upholster the chair (halleluja!), build a DIY coffee table ottoman (finished!), and make coordinating throw pillows (stay tuned!).




The chair fabric stayed in my closet for 3+ months, as I found excuse after excuse not to start. On New Year's day--4 months BEFORE our wedding--we plunged in.  The chair is comprised of four pieces: two arms, the rounded back, cushion and many yards of piping. Using my trusty seam ripper, I removed all of the existing upholstery and Michael used the old fabric as a template to cut the new.  I painstakingly removed the 2 inch bias-cut fabric around the piping so that I could encase the existing cording in velvet bias strips for the new piping. Once all the fabric was cut, I labeled Ziploc bags for each piece (left arm, right arm, back, cushion) and we stuffed the Ziplocs with the template, the newly cut fabric, and the corresponding velvet piping. The steps up until this point took us the better part of an entire weekend, the two of us working side-by-side.

The original fabric is on the back piece of the chair and the new fabric is already stapled to the front edge of the chair.  
  
When I first attempted to sew the new back piece in late January, my Brother machine (sans walking foot) quickly let me know who was boss. Let's just say there was lots of broken needles and cursing.  I persevered and *mostly* sewed the piping to the rounded edges. The chair back sat in the corner of our living space for the next five months while we attended to wedding preparations. 


After the dust settled from the wedding, we picked the project back up earlier this summer.   This time, I had a new Bernina 1008--birthday present from Michael.  In late June, I headed to  City Sewing to buy a walking foot.  Over two separate weekends in June and early August,   I worked on the arms of the chair.  Each arm consisted of three pieces of fabric and two sections of piping.  The fabric is stapled on the underside of each arm.   From there, I redid the rounded corners on the chair back and made the zippered seat cushion.  The contours of the arms and back are still not perfect, but I am satisfied with the results. 

Michael took it from here... he put the three pieces of the chair back together.  This involved lots of screws, nuts, and bolts, and the stapler.  He then placed a new tack strip (purchased at Mood) on the chair back to hold the final piece of fabric. 


We are both so proud of our new chair!




Thursday, August 14, 2014

Here we Go!


HERE I AM!  I'm FINALLY ready to carve out a place in the blogosphere where I
learn to sew a beautiful, well-fitting wardrobe.  


Here are my makes to date:


Skirt with fabric from Winmill for the NYC Ballet (2011).  That's me
on the far right. 


















Simplicity 2178 for a Boston wedding with fabric from Elliott Berman (2011) 




















Simplicity 2250 in Liberty lawn for a barbeque rehearsal dinner in Florida (2011) 

Skirt (Gertie's instructions) with silk from Gorgeous Fabrics for NYC holiday party (2012)


Rehearsal dinner dress (!!) using the Laurel with guipure lace from Gorgeous Fabrics and silk charmeuse from B&J (2014) 

In addition, I have completed a pair of pajamas with a cuff of Liberty fabric (2010), a Liberty circle skirt (2010), a Vogue 1174 corset dress for a holiday party in London (2011), a dress that I never wear (2012), another dress I never wear (2013), and a maxi skirt (2013).    

Here is the list of my unfinished objects (UFO's):  silk Bombshell bustier, Simplicity 1880 in coral silk organza, 1 pencil skirt for a friend in linen, 1 pencil skirt for me in wool crepe, 1 cotton Laurel dress, and 1 chair upholstery project that has been languishing in the corner for 7 months. I've also promised a friend a shift dress that I haven't started and my sister a pair of pajamas... 

Where to begin???